If you’ve rooted your phone using Revolutionary you can partition your SD Card from the Recovery menu. After booting into recovery (Revolutionary CWM), you have an optionPartition SD Card. It will ask you how big the EXT partition should be, and how big the Swap partition should be. After selecting the right values, it will automatically partition your SD Card.
If you didn’t used Revolutionary to root your phone, you can still follow the tutorial from here, and after inserting the key, it says that your phone is S-OFF, but it still asks you if you want to install Clockwork Mod. Press y and Enter and wait until the the CMD disappears. Reboot into recovery once again and you should see the Partition SD Card option that I was talking about in the first paragraph.
Note that creating partitions this way will result having an EXT3 partition. If you want an EXT4partition, connect to the phone with adb shell and follow only the 6th step of the following tutorial.
How manually partition SD Card
Don’t be afraid to do something manually. It may be a little bit harder than using a specialized software, but you can learn new things and you know you did it and it worked. For example, partitioning from ROM Manager proved to be a mistake, because I couldn’t select an EXT Partition bigger than 512Mb and it practically messed up my partitions… and using gParted to partition your SD Card is a little bit difficult since you have to install the image on a CD or stick, reboot your PC in gParted and try to get things working from there. From my experience, every time I’ve tried this using a stick to load the image, I couldn’t see the SD Card.
So.. doing something manually is better
Step 1 – Connect to Phone
Restart your phone to recovery mode. Connect your phone to the PC via USB Cable. Use adb shell to connect to the phone
Step 2 – Display the partitions
Open parted (an application from the Android OS) to partition your SD Card
After you connect with adb shell write parted /dev/block/mmcblk0 and then <Enter>. Wait until you see (parted) in the left if your cursor and write print and <Enter>. You should get something like this:
As you can see, I’ve got a 3942MB SD Card. It has 3 partitions
- Number 1 – 2886MB FAT32
- Number 2 – 1024MB EXT3
- Number 3 – 31.6MB linux-swap
I’m going to remove all these partitions in order to repartition the card. Note that you’ll lose all your data from the card.
Step 3 – Remove the existing partitions
You’ll have to remove the existing partitions first. So.. look at how many partitions you have, and then write remove <space> partition number <Enter>.
You can run the print command again to make sure everything was deleted. Now I have an empty unpartitioned SD Card
Step 4 – Create the partitions
Ok, let’s start computing the partitions size. For most of the custom ROM, you need an 1GB EXT partition, and a FAT32 partition.. You’ll also need a swap of 32 or 64MB. So, let’s say that you want to create a 1024MB EXT and a 32MB swap partition. Subtract these values from the entire partition size, and you’ll get the needed size of your FAT32 partition. In my case, I have a3942MB card, so 3942-1024-32 = 2886MB for FAT32
In conclusion, we’ll have to create:
- 2886MB FAT32
- 1024MB EXT2 (because parted only allows us to create EXT2 partitions, but we’ll convert it to EXT3 or EXT4 at the end of the tutorial)
- 32MB swap
Now run the following commands in the (parted) shell:
- mkpartfs primary fat32 0 2886 (first value is 0, second value is the size of FAT32 partition)
- mkpartfs primary ext2 2886 3910 (first value is the size of FAT32 partition, second value is EXT4 partition> in our case 2886+1024=3910)
- mkpartfs primary linux-swap 3910 3942 (first value is EXT4 partition>, in our case 2886+1024=3910, second value is the size of the entire SD Card, in our case 3942)
Note that for every command, the first value is the second value from the previous command. The first value from the first command should be 0 and the second value from the last command should be the size of the entire SD Card.
After you finish with creating the partitions, run print again and you’ll see the newly created partitions:
If everything is ok, run quit to exit the parted, and return to the adb shell
Step 5 – convert your EXT2 partition to EXT3 (skip it if you don’t want to do this)
In the adb shell, run the following command to convert your EXT2 partition to EXT3
Note that the last number from the command, 2, refers to the second partition. If your EXT2 partition has another number assigned (you can view the number using the print command), replace the “2” with your number, but if you’ve followed the tutorial and you didn’t create more or less partitions, it should be 2 )
tune2fs -j /dev/block/mmcblk0p2
Step 6 – convert your EXT3 partition to EXT4 (skip it if you don’t want to do this, but you must follow Step 5 if you have an EX2 partition to convert it to EXT3)
In the adb shell, run the following command to convert your EXT2/3 partition to EXT4
Note that the last number from the command, 2, refers to the second partition. If your EXT partition has another number assigned (you can view the number using the print command), replace the “2” with your number, but if you’ve followed the tutorial and you didn’t create more or less partitions, it should be 2 )
tune2fs -O extents,uninit_bg,dir_index /dev/block/mmcblk0p2
If you want to check your filesystem too, you should run e2fsck -fpDC0 /dev/block/mmcblk0p2too
Step 7 – Finish
Finished. Check your work with print.
- command: parted /dev/block/mmcblk0 (open parted again)
- command: print (check all your system partitions and their sizes)
- command: quit (exit parted)
- command: reboot (reboot your system to the operating system)
Step 8 – Align your SD Card (optional)
In order to increase the access time, write speed and read speed of your SD Card, you may want to follow this tutorial[Ref: http://android.bytearrays.com/android/how-to-partition-sd-card/]